Icom ic450(unlocked) tag

Discussion on Icom technologies, including programming, tutorials, schematics, requests for help and new releases etc
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
Post Reply
Nitro2500
Newly Registered Users
Posts: 1
Joined: Sun Dec 25, 2016 10:24 pm

Icom ic450(unlocked) tag

Post by Nitro2500 »

Icom Ic 450 displays unlocked when you go outside of the 450mhz to 520mhz recieve range. You will not be Able to recieve any frequency out side of this range. For eg 418.400mhz will display unlocked and will not recieve

User avatar
youngn
Forum Manager
Posts: 498
Joined: Sun Aug 24, 2008 11:55 am
Location: Rochedale South

Re: Icom ic450(unlocked) tag

Post by youngn »

Nitro2500 wrote:Icom Ic 450 displays unlocked when you go outside of the 450mhz to 520mhz recieve range. You will not be Able to recieve any frequency out side of this range. For eg 418.400mhz will display unlocked and will not recieve
Thankyou for this discovery, it seems a bit sad as most Icoms I have played around with will happily stretch their legs a fair way when it comes to RX.
"YOUNGN"

ziggybyrne
Registered User
Posts: 47
Joined: Tue Aug 24, 2010 8:34 pm

Re: Icom ic450(unlocked) tag

Post by ziggybyrne »

My experience with the 400 pro's and 221's is they will go about 15 mhz outside of their published frequencies. ie the 400 pro rated 450-500 will recieve from 435-515 mhz.

Cheers Ziggybyrne

Post Reply