468.300

Post Reply
Daniel
Registered User
Posts: 298
Joined: Fri Nov 23, 2007 10:04 pm

468.300

Post by Daniel » Wed Feb 10, 2010 9:27 pm

Anyone having troubles with 468.300 being scratchy...even when your within range of the repeater. This repeater covers the whole of Redcliffe area including Rothwell, Woody Point, Clontarf and Margate. Most of these areas it is really scratchy and unreadable. Its been like this for quite a while.
Daniel

User avatar
rochedalescan
Founder
Posts: 1631
Joined: Fri Jun 01, 2007 5:08 pm
Location: Brisbane
Contact:

Re: 468.300

Post by rochedalescan » Wed Feb 10, 2010 9:36 pm

Are the links to it scratchy aswell ? Have you tried different frequencies for it ? might just be a case of trial and error or did it use to be all good ?
Shane Logan
Aussiescanners Founder

Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~

User avatar
bodyguard
Registered User
Posts: 1210
Joined: Fri Aug 31, 2007 7:54 pm
Location: Brisbane, QLD

Re: 468.300

Post by bodyguard » Wed Feb 10, 2010 9:49 pm

yeah mines scratchy as well, and has been for a while
Cheers
BG


UBC9000XLT, UBCT8, BCT15X, UBC92XLT, Kenwood R-5000, PSR-410 , KG-UVD1P

Daniel
Registered User
Posts: 298
Joined: Fri Nov 23, 2007 10:04 pm

Re: 468.300

Post by Daniel » Thu Feb 11, 2010 9:21 am

468.275 works fine, Narangba repeater is working fine, Caboolture working fine. Its just 468.300. Its obviously some unplanned downtime. This frequency was an excelent frequency. Now officers are putting there lives at risk when they go into areas that are total blackspots which used to have excelent coverage.
Daniel

User avatar
Phil
Administrator
Posts: 1482
Joined: Sun Jun 03, 2007 8:51 pm
Location: Southside of Brisbane, Qld

Re: 468.300

Post by Phil » Thu Feb 11, 2010 1:41 pm

hell for listening down on the southside i prefer .275 as i can get it crystal clear, in more recent times i can't even get .3
Phil
Forum Administrator
phil@aussiescanners.com.au

Uniden UBCD996T, RH96
Motorola GP328, GP338, GP328 Plus, XTS3000, GM300, DP3400 VHF x2, DP4801e, DP4801ex, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG

fireviking
Registered User
Posts: 4
Joined: Mon Feb 08, 2010 7:48 pm

Re: 468.300

Post by fireviking » Sun Feb 14, 2010 8:42 am

try 468.5625 or 469.2125. 2125 is excellant

User avatar
Phil
Administrator
Posts: 1482
Joined: Sun Jun 03, 2007 8:51 pm
Location: Southside of Brisbane, Qld

Re: 468.300

Post by Phil » Sun Feb 14, 2010 8:43 pm

where are these located, as i can't get anything around Deception Bay area
Phil
Forum Administrator
phil@aussiescanners.com.au

Uniden UBCD996T, RH96
Motorola GP328, GP338, GP328 Plus, XTS3000, GM300, DP3400 VHF x2, DP4801e, DP4801ex, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG

User avatar
Phantom
Forum Manager
Posts: 1305
Joined: Thu May 15, 2008 12:28 pm
Location: SE QLD

Re: 468.300

Post by Phantom » Mon Feb 15, 2010 7:51 am

brisbanescan wrote:where are these located, as i can't get anything around Deception Bay area
http://web.acma.gov.au/pls/radcom/site_ ... E_ID=15782

Daniel
Registered User
Posts: 298
Joined: Fri Nov 23, 2007 10:04 pm

Re: 468.300

Post by Daniel » Mon Feb 15, 2010 8:01 am

468.5625 (Channel 59) is located at Caboolture

469.2125 (Channel 111) Narangba which is what Deception Bay usually uses

And yeah both these channels works really good compared to 468.300 but you can tell when your listening to those channels that the repeater isnt local because it is still fairly scratchy. But its better than nothing...
Daniel

Daniel
Registered User
Posts: 298
Joined: Fri Nov 23, 2007 10:04 pm

Re: 468.300

Post by Daniel » Fri Feb 19, 2010 5:03 pm

By the way channel 38 is operational again. (468.300)
Daniel

User avatar
bodyguard
Registered User
Posts: 1210
Joined: Fri Aug 31, 2007 7:54 pm
Location: Brisbane, QLD

Re: 468.300

Post by bodyguard » Fri Feb 19, 2010 5:31 pm

Daniel wrote:By the way channel 38 is operational again. (468.300)
Dan has it just come back online ?
Cheers
BG


UBC9000XLT, UBCT8, BCT15X, UBC92XLT, Kenwood R-5000, PSR-410 , KG-UVD1P

Daniel
Registered User
Posts: 298
Joined: Fri Nov 23, 2007 10:04 pm

Re: 468.300

Post by Daniel » Fri Feb 19, 2010 5:44 pm

Yeah mate just came back online late this morning. It was some unplanned downtime...I think I was told it was about a month that the repeater has been down for!

Cheers,
Daniel
Daniel

Post Reply